| Master Code |
User 02 |
|
|
| Secondary Codes |
User 03 to 33 |
|
|
| Duress Code |
User 33 |
(Duress can be any location, but preferred in location 33) |
|
| Add Master |
Installer Code + 8 + 02 + New Master Code |
(Keypad should beep) |
| Change Master |
Master Code + 8 + 02 + New Master Code twice |
(Keypad should beep) |
| Add Code |
Master Code + 8 + User (03 to 33) + New Code |
(Keypad should beep) |
| Erase Code |
Master Code + 8 + User (03 to 33) + # + 0 |
(Keypad should beep) |
| |
| After above commands keypad should beep indicating successful, if not try again |
| You cannot pause more than 2 seconds while entering below commands or it won’t work |
| Assinging Attributes Master code + 8 + User (03 to 33) + # + [Attribute Number] + [Value] |
| Attributes Values |
|
|
|
| 1 = Authority Level |
|
0-4 (see Authority Level table below) |
| 2 = Access Group |
|
0-8 (0= not assigned to a group) |
| 4 = RF Zone # |
|
1st zone number of keyfob |
| 5 = Open/Close paging |
|
1 for yes, 0 for no |
| Authority Levels |
|
(Can only be changed for users 03 – 33) |
| Level |
Value |
Functions |
|
| User |
0 |
Normal user. Cannot add/delete codes, set system clock, view event log, or program schedules |
| Arm Only |
1 |
Code can only arm system |
| Guest |
2 |
Code can only disarm system if was used to arm system |
| Duress |
3 |
Performs security functions, but also silently sends a duress message to central station |
